COVID-19 has slowed down my stock levels, I have taken off the ECU’s until i have stock. Ill enable them while I have stock. I have a quantity of parts coming to hopefully fill the waiting orders.
STM32 Modules are almost complete, Im waiting on the final MCU board to arrive for permanent install on the BMW test car. This should enable full Sequential Injection and Ignition on 6 and 8 cylinders. These are a direct plug in for my Pro ECU’s.
Its small
Mega2560 MCU
4 Injector outputs
4 ignition outputs (Smart coils or Igniters), Switchable 5v-12v
all the usual protected inputs (TPS, Coolant, MAP, IAT, O2)
Flex fuel
Clutch Input
Internal map 250 kpa
Thermo fan
Fuel Pump
Tach output
One Low Current spare output
VR and Hall triggers, Plug in VR/Optical conditioners
Connected with a 26 pin TE Superseal connector.
Comes in a printed case as pictured.
26 pin plug end and crimp ends to make your wiring harness
price is $250 AUD + Postage.
Now a complete package with the ability for upgrade processors.
Can be used with my ATMEGA2560 or STM32f407 custom MCU boards.
my STM32F407 are currently beta testing and more information is coming soon.
4 Injectors.
4 High Current, *can be used as injectors for 8 cylinder using STM32F407 (still in development)
8 Ignition (Smart coils or Igniters) switchable 5v-12v, *can use all 8 ignitions on 8 cylinder using STM32F407 (still in development).
standard Fuel, Fan, Tach, 2 x Spare low current outputs.
Tach output 5v-12v switching.
One spare analog input (2 if the onboard Baro isn’t used)
Internal Map.
Internal Baro.
Flex Fuel
Clutch input
Bluetooth compatible.
Stepper Idle control or add extra HC outputs with expansion board.
Superseal 60 Pin connector.
Buck Power supply.
Plug in VR conditioner compatible.
Aluminium Enclosure.
All come with both 26/34 pin connectors, Crimp pins, Wiring diagram and instructions.
Basic version.
4 Injector channels
4 Ignition channels (Smart coils or Igniters) Switchable 5v-12v
1 HC Current output
4 Low current outputs ULN2803 (paired for 1A) fuel pump, Tachometer output, Thermo fan, Spare
Tachometer Voltage select 5-12 volt output
MAP, TPS, O2, CLT, IAT, Flex fuel, one Spare Analog input.
Internal 250kPa Map Sensor
Clutch input.
Buck power supply
Serial 3 header
Bluetooth Header* (Used for Tuner Studio)
Plug in VR modules*, can be used with 5v hall effect without any other circuit and both VR inputs are protected.
80×80 board.
Superseal 26 pin connector.
Plug in Custom Mega2560 CPU.
$290 AUD Plus shipping, with connector and crimp pins to make your harness, Instructions and wiring diagram.
Images show Bluetooth and VR Conditioner Installed and are available at additional cost.
*Bluetooth modules configured to go are available as a addon for $15
*VR Conditioners are available for $25
