2 New products, WIFI and Classic Bluetooth. These are able to be used in the STMPRO and Honda PNP units and connect to Tuner Studio
Cannot be used if using one of the displays that connects to the display port.
New Wireless Connections.
2 New products, WIFI and Classic Bluetooth. These are able to be used in the STMPRO and Honda PNP units and connect to Tuner Studio
Cannot be used if using one of the displays that connects to the display port.
I would like to know when the engine simulator will be made available for order. It is showing out of stock for quite some time.
Thanks
I will have stock of them on Thursday. 24-4-25
Hey I just installed speedhut gauges in my 240z on top of running the stm pro, I wanted to know if I can tap into the sensor reading wire (I heard its not ideal because it can change the reading) or is there by any chance empty pins to use like analog output so that I can send a 0-5v signal to the gauge from the ecu instead? I assume I can configure the pin to send data out in tunerstudio.
Only looking to send date for Coolant Temp and Oil Temp.
Thank you.
Hi, Sorry there is no programable analogue outputs. you may be able to piggy back 0-5v gauge without problem, but if it’s a temp gauge you cannot as it uses a bias resistor and works on resistance value and not a voltage value.
So oil Pressure yes.
oil temp no.
I don’t see email contact information so I’ll ask here in interested in the dbw module im using 350z pedal and audi tt tb let me know what I need would be cool to control through canbus
As far as the hardware you are using, it should not be a problem, But as I don’t have those parts I cannot confirm. As long as the TPS and the Accelerator pedal use a reference voltage of 5v should be ok.
This version does not have can bus, I am currently working on a version that does, so the new version will be programmable using Can Bus. I do not have a timeline.